front parking sensors

has anyone fitted the genuine front parking sensors part number..990E0-54P56-000.if so may i ask is it just 4 sensors with a buzzer and control box????

It is a set of 4 sensors, Buzzer and Control Box but a bit more involved than your cheap ebay kits....



If it is anything like the rear sensors you can programme the control box for different settings as well as a system check that identifies a fault in the system or sensors etc

Karl

Thanks Karl i fitted a genuine suzuki rear kit to my sz-t that i got for a bargain price of £30 from ebay,the guy must of bought it thought stuff that and sat on it for a while then decided to sell it in the wrong category,fitting was fun,which i did not mind but we were on lockdown with nothing else to do at the time...but my front bumper is coming off sometime this year the front support brackets for the air condenser have rusted so i am going to sort them out,i was just thinking of fitting a front kit,but did not know how the front kit differed from the rear,apart from maybe a dash switch to activate them

I have the rear fitting CD that covers all Suzuki models but I don't think it covers any front fitment
I will see what I can find

Karl

ive checked my cd for the rear kit and there is nothing for the front,and to be fair i would not have expected the front being on there..but have sent an email off

I have this set for the back. It says it's an oem suzuki. But officially it's a set of a Dometic (weaco) MagicWatch MWE. And that's one of the better aftermarket PDCs.

Karl, just a question....

Do you happen to know what this cable is for??

Just spoke to a friend who works at Suzuki who said it was a switch to disable the front sensors

Karl

Admin wrote:Just spoke to a friend who works at Suzuki who said it was a switch to disable the front sensors

Karl

Okay, thanks for the info.
I thought, they forgot to install something with my rear sensors.

No rear sensors are basically switched with reverse light wiring but fronts are permanent, factory installed front sensors have a (P) switch on the dash for when you are in traffic jams etc so it makes sense the optional front sensors have a cancel switch too...



Karl

so in theory i could just fit a set of reverse sensors to the front just add a switch so they can be turned off when desired...might start looking for some next month onwards ready for summer

The only thing to check is the length of the sensor wires , rear sensors wiring is long enough to reach the control unit when located in the rear QTR panel but may not be long enough to pass the engine bay to the bulkhead

Karl

good thinking..cheers

Just a quick question,if the oems were fittited at a suzuki dealers would we get the proximity read out from the dash as factory fitted?

styx wrote:Just a quick question,if the oems were fittited at a suzuki dealers would we get the proximity read out from the dash as factory fitted?

I had the rear oem fittited by the dealer. And All I have is a beep beep beep

Thats typical,thought it would just be a software addition for the dddisplay